Eaton ZB12/XTOB BC1 Series Manual page 55

03/15 MN03407004Z-DE/EN
Approvals
c
The ZB12/XTOB...BC1 and ZB32/XTOB...CC1 overload
relays are compliant with IEC EN 60947 regulations for
"low-voltage switchgear" and meet the requirements of the
94/9/EU (ATEX 100a) directives for the protection of Ex e
motors.
Furthermore, motors can be explosion protected in zones 21
and 22 (areas with combustible dusts) in compliance with
EN 60079-14. The wiring of the motor feeder must be
carried out in accordance with IEC/EN 60947-1, Table 9.
II(2)G [Ex d] [Ex e] [Ex px]
II(2)D [Ex p] [Ex t]
0102
The overload relays are UL and CSA approved for use in USA
and Canada.
U s
Further approvals exist for:
China
Approvals
PTB 10 ATEX 3010
51