Kumo Cloud; Quick Setup - Mitsubishi Electric PAC-WHS01WF-E Technician Manual

®

kumo cloud

®
The kumo cloud app works with the Mitsubishi Electric Wireless Interface to enable remote control of
Mitsubishi Electric Cooling & Heating equipment from a smartphone or a tablet. The app can be used as
the only controller or with compatible controllers. When a Wireless Interface 2 (WI 2) is used to connect the
®
equipment to Wi-Fi , an MHK1 or MHK2 controller can also be connected in series. For information regarding
the MHK2 remote controller, see the MHK2 Installation and Operation manuals at:
http://mylinkdrive.com/USA/Controls

Quick Setup

1. Install outdoor and indoor units. Connect a PAC-USWHS002-WF-1 or PAC-USWHS002-WF-2 (WI 2)
Wireless Interface to the CN105 connector for each indoor unit. Only a professional should complete
installation to prevent electric shock or personal injury.
See the Install section. For more information regarding the WI 2, see the WI 2 Installation manual at:
https://qrco.de/WI2InstallManual
2. The home wireless network should already be set up. Note the network name and password.
Network name:
Password:
3. Use the kumo cloud app to Connect a New Site. See the
4. Add each indoor unit and adjust settings if needed. See the
5. Use the app to send an email to Transfer Ownership to the owner. See the
section. For daily use, including changing the temperature, see the kumo cloud Owner Manual at:
https://qrco.de/kumocloudOwnerManual
© 2021 Mitsubishi Electric US, Inc.
Sites
Home
RH 45%
Master
Bedroom
70
°
RH 45%
O ce
65°
Home
section.
Connect a New Site
Add Indoor Units section.
Transfer to the Owner
Specifications are subject to change without notice.
Zones
Edit
Home
RH 45% RH 44%
Maria Ann's
Family Room
Room
70° 70°
RH 44% RH 45%
Dining
Kitchen
Room
70° 70°
Guest
2nd Floor
Rooms
Another Room
OFF
Here
Program Settings
3