Mitsubishi Electric PAC-WHS01WF-E Technician Manual page 12

Zones
These are the Zones that are now included in this site. This will include the Zones that have recently
5.
been created. Tap this option in order to inspect these Zones.
Accessories
6. Tap Accessories in order to add devices to the site including Wireless Temperature and Humidity
Sensor (Wireless Sensor), backup heater, humidifiers, dehumidifiers, ventilation units, etc. See the
section for more information.
Accessories
Test Run
7. Tap Test Run to perform a test run operation to ensure that the site and its units are running correctly.
For more information regarding test runs, see the
Add Indoor Unit
8. Tap Add Indoor Unit to connect more indoor units. See the
Finish Setup
Tap Finish Setup in order to end the installation. This option allows the installer to retain control of
9.
the unit in cases where there is more to setup at a later time. To end setup and transfer control of the
system to a homeowner, tap Transfer to Owner.
Specifications are subject to change without notice.
12
Back Site
5
Jones' House: 2 2 z z o o n n e e s s
Accessories
7
Test Run
Add indoor unit
FINISH SETUP
9
TRANSFER TO OWNER
Home Program
Settings
Test Run
6
8
section.
Add Indoor Units section.
© 2021 Mitsubishi Electric US, Inc.