Table of Contents
Advertisement
3.5.1 HDD Security Configuration
Set User Password
Set HDD user password.
***Advisable to Power Cycle System after Setting Hard Disk Passwords. ***
Discard or save changes option in setup does not have any impact on HDD when
password is set or removed. If the 'Set HDD User Password' option is grayed out, do
power cycle to enable the option again.
3.5.2 Security Configuration
Secure Boot
Secure Boot feature is Active if Secure Boot is Enabled, Platform Key (PK) is
enrolled and the System is in User mode. The mode change requires platform reset.
Secure Boot Mode
Secure Boot mode options : Standard or Custom.
In Custom mode, Secure Boot Policy variables can be configured by a physically
present user without full authentication.
Key Management
Enables expert users to modify Secure Boot Policy variables without full
authentication.
Figure 4-5-1 : HDD Security Settings
Figure 4-5-1 : HDD Security Settings
P.33
Advertisement
Table of Contents
