Acnodes PCW81 Series User Manual page 19

3.3.2.2 GT - Power Management Control
RC6 (Render Standby)
Check to enable render standby support.
Maximum GT frequency
Maximum GT frequency limited by the user.Choose between 300MHz (RPN) and 1150 MHz
(RP0). Value beyond the range will be clipped to min/max supported by SKU.
Disable Turbo GT frequency
Enabled : Disables Turbo GT frequency.
Disabled : GT frequency is not limited.
3.3.3 PCH-FW Configuration
ME State
When Disabled ME will be put into ME Temporarily Disabled Mode.
Manageability Features State
Enable/Disable Intel(R) Manageability features.
NOTE : This option disables/enables Manageability Features support in FW. To disable support
platform must be in an unprovisioned state first.
AMT BIOS Features
When disabled AMT BIOS Features are no longer supported and user is no longer able to access
MEBx Setup.
Note : This option does not disable Manageability Features in FW.
AMT Configuration
Configure Intel Active Management Technology Parameters.
ME Unconfig on RTC Clear
Disabling this option will cause ME not be unconfigured on RTC clear.
Figure 2-3-2-2 : GT - Power Management Control
Figure 4-3-1 : PCH-FW Settings
P.16