Table of Contents
Advertisement
3.4.2.2
SATA & RST Configuration
Figure 4-3-10 : 2.4.2.2 SATA & RST Configurations
SATA Controller(s)
Enable or disable SATA Device.
SATA Mode Selection
Determines how SATA controller(s) operate.
Software Feature Mask Configuration
RAID OROM/RST driver will refer to the SWFM configuration to enable or disable
the storage features.
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
Options for each SATA port :
Port n
Enable or disabled SATA Port.
Hot Plug
Designates this port as Hot Pluggable.
Spin Up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET initialization sequence
to the device.
SATA Device Type
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive.
P.30
Advertisement
Table of Contents
