Advertisement
Step 7
You will need
4 x Dowels
4 x Long
(H1)
Screws (H2)
Phillips Head
Screwdriver
Insert 4 x Dowels (H1) into Left & Right Side
Panels (P3 & P4).
Attach Bottom Panel (P2) to Left & Right Side
Panels (P3 & P4) with 4 x Long Screws (H2) by
tightening with the Phillips Head Screwdriver.
Ensure that the Back Panel (P5) is slotted into
the grooves of Bottom Panel (P2).
Step 8
You will need
4 x Leg
8 x Long Bolts
Plates (H12)
(H13)
16 x Short
4 x Plastic
Bolts (H14)
Glides (H18)
1 x Allen Key
Hammer
(H17)
Phillips Head
Screwdriver
Secure 4 x Leg Plates (H12) to 4 x Legs (P7) with 8 x Long Bolts (H13)
by tightening with an Allen Key (H17).
Attach 4 x Legs (P7) to Bottom Panel (P2) with 16 x Short Bolts (H14)
by tightening with an Allen Key (H17).
Hammer 4 x Plastic Glides (H18) onto the bottom of Legs (P7).
fantasticfurniture.com.au
H14
(P7)
H14
(P7)
H14
(P2)
(P4)
Ensure the countersunk
holes on the Leg Plate are
facing up, so that the Screws
sit flush with the top of
(P7)
the Leg Plate once attached.
(P7)
H14
(P3)
H13
H12
(P7)
H14
Page 8
Advertisement
