Advertisement
Step 12
You will need
4 x Cam Nuts
Phillips Head
(H4)
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4 x Cam Nuts (H4) into Left & Right Drawer
Side (P9 & P10) as shown.
Rotate the cam nuts so the arrows point towards the incoming
cam bolts.
Attach Drawer Front (P8) to Left & Right Drawer Side (P9 & P10) by tightening all cam nuts
with the Phillips Head Screwdriver.
Ensure that the Drawer Base (P11) is slotted into the grooves of Drawer Front (P8).
Step 13
You will need
1 x DL
1 x DR
Runner (H8)
Runner (H9)
Phillips Head
4 x Small
Screwdriver
Screws (H5)
Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P9) and 1 x DR Runner (H9)
to the bottom of Right Drawer Side (P10) with 4 x Small Screws (H5) by tightening with
the Phillips Head Screwdriver.
fantasticfurniture.com.au
(P10)
(P11)
(P10)
(P8)
(P9)
(P9)
Page 10
Advertisement
