Advertisement
Step 3
You will need
Phillips Head
4 x Cam Bolts
Screwdriver
(H3)
Attach 4 x Cam Bolts (H3) to Left & Right Side Panels (P3 & P4) by tightening with the Phillips
Head Screwdriver.
Step 4
You will need
4 x Dowels
4 x Cam Nuts
(H1)
(H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4 x Cam Nuts (H4) and 4 x Dowels (H1) into Shelf Panel (P6) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Left & Right Side Panels (P3 & P4) to Shelf Panel (P6) by tightening all cam
nuts with the Phillips Head Screwdriver.
fantasticfurniture.com.au
fantasticfurniture.com.au
(P3)
(P4)
(P4)
(P3)
(P6)
Ensure that (P6) is
facing the right way.
The front of (P6) will
be flush with front of
(P3) and (P4).
Page 6
Advertisement
