7. Set up the operating parameters—Activate the pushbutton
Pushbutton models
Pushbutton deactivation
By default, the pushbutton on ScanPlus pushbutton models is deactivated.
Pushbutton activation
Pushbutton operating scenario
Other pushbutton operating scenarios are provided in the ScanPlus Reference Manual .
The same operating scenario is provided for all pushbutton models—
when the pushbutton is pressed, the ScanPlus remains active for a
default period of 2 s and goes into standby before the end of this period
if there is a good read.
Active For Read Duration (2 s)—Standby After Good Read
SP/XX/IG/12/E/980228
Pushbutton Not Active (*)
press pushbutton
2 s
good read
standby
7-3