Table of Contents
Advertisement
2. Switch off the host system and connect up the ScanPlus
Keyboard wedge—ScanPlus with Y cable (PC AT and compatible)
keyboard
cable
1. Switch off the host system.
2. Disconnect the keyboard from the host
computer.
3. Connect the ScanPlus Y cable between
the keyboard and the host computer.
ScanPlus with
keyboard wedge
Y cable
The jack connector of the external power supply has been designed to fit tightly
in the Y cable socket—tilt the jack slightly to ease insertion (1) and then push
hard vertically (2).
Do not switch on the host computer until you have connected up and
plugged in the external power supply.
2-2
DIN/mini-DIN
use the DIN / mini-DIN
adaptor if applicable
4. If your host system requires an external power supply:
Connect the power supply to the ScanPlus Y cable.
Plug the power supply into the mains socket.
keyboard input
connector
adaptor
use double-sided adhesive to
fix the Y cable overmold to
the worktop or PC if required
2
Ö
host computer
power supply
(if required)
1
SP/XX/IG/12/E/980228
Advertisement
Table of Contents
