Table of Contents
Advertisement
7
Set up the operating parameters—
Activate the pushbutton
operating
parameters
ScanPlus operating parameters
Now that you have entered your interface number and set up your data
transmission and symbology parameters (if required), you are ready to
use your ScanPlus in most working situations.
If you have a pushbutton model, you may still have to activate the
pushbutton—the pushbutton is deactivated by default. Use your
ScanPlus to read the appropriate pushbutton activation code provided
on the following pages.
At the end of this section you will find a full list of additional ScanPlus
operating settings.
The full set of ScanPlus operating parameter options is provided in the ScanPlus
Reference Manual .
Resetting the default ScanPlus operating settings
If you want to reset all the default ScanPlus operating settings, you can
scan the Reset Factory Defaults bar code provided in Appendix C, but
you will then have to completely reconfigure your ScanPlus.
In most cases, it is easier to reselect the individual settings as required.
SP/XX/IG/12/E/980228
parameters that affect the way the different ScanPlus models
operate—general operating parameters include pushbutton activation,
beep and indicator LED settings, operating mode settings, etc.
7-1
Advertisement
Table of Contents
