Table of Contents
Advertisement
B
Jumper settings—Dual-output
RS-232 CMM
Changing the jumper settings
1. Remove the four attachment screws and remove the cover of the CMM.
2. Set the jumpers as required (see the available settings on the next
page).
Jumper settings are identical for standard and reverse gender dual-output RS-232 CMMs.
Make sure the TO HOST and TO TERMINAL labels are correctly positioned when you
reassemble the CMM (see RS-232—Dual-output CMM and external power supply in
Section 2).
SP/XX/IG/12/E/980228
B-1
Advertisement
Table of Contents
