Table of Contents
Advertisement
3
Switch on the host system
What the beeps and LED flashes mean
The ScanPlus should emit two beeps to indicate that the power-up
sequence has been completed.
The green indicator LED will then indicate the interface type selected
for the ScanPlus.
green LED indication
continuous LED
no LED
1 flash
2 flashes
3 flashes
4 flashes
5 flashes
7 flashes
The Part Number (P/N) indicates the hardware interface setup for your ScanPlus model.
If you have an energy saver pushbutton model and the pushbutton is activated, the
power-up beeps and power-up LED will not operate.
SP/XX/IG/12/E/980228
selected interface type
null interface
laser emulation
wand emulation
RS-232 C
IBM 46xx cash registers
RS-232 TTL
OCIA cash registers
keyboard wedge
P/N identification
factory default setting
(all models)
x - x x x x x 0 - x x - x x
x - x x x x x 1 - x x - x x
x - x x x x x 2 - x x - x x
x - x x x x x 3 - x x - x x
x - x x x x x 4 - x x - x x
x - x x x x x 5 - x x - x x
x - x x x x x 7 - x x - x x
3-1
Advertisement
Table of Contents
