Hands-Free Scanning - Intermec 1550 Quick Reference Manual

C o d e 39
Nugget

Hands-Free Scanning

If you have an auto-trigger scanner (1550B0200 or 1550B0400),
you can use the scanner stand for hands-free scanning. To order
a scanner stand, see "Accessories" later in this guide.
Note: Using the IRL Z command for remote triggering will not work
with the 1550 scanner.
To scan a bar code using the scanner stand
1. Place the scanner
handle on the bottom
ledge of the holder and
then rotate the handle
in the holder until it
locks into place.
2. Align the scanner and
adjust the column
height so that the
pulsating laser beam
covers the entire label
on the base of the
stand.
3. To scan a bar code,
place it right-side up
over the label on the
base of the stand.
When the reader/terminal
beeps, the bar code has
been successfully read.
Note: If your scanner stand
does not have a small magnet
in the holder, you need to
upgrade your stand using
upgrade kit part number 066799.
D>JI
Holder
155XQG.005
155XQG.004
9