Intermec Sabre 1550 Quick Reference Manual page 9

C39
To connect the scanner to a reader/terminal
1. Turn off the reader/terminal.
2. Connect the modular plug on the interface cable into the
bottom of the scanner handle.
3. Tighten the screw using a medium-sized, straight-slot
screwdriver to secure the plug in the scanner handle.
4. Connect the other end of the cable to the reader/terminal.
Note: The cable connector plug for the reader/terminal will vary
according to the cable you ordered.
Scanner
handle
Screw
To learn basic scanning operation, scanning tips, and how to
scan hands-free using the scanner stand, see "Operating the
Sabre 1550 Laser Scanner" in the next section.
Modular
plug
Interface
cable
155XQG.002
9