Advertisement
Mounting set
LBM7013, LBM7113, LBM7213
__________________________________________________________________________________
There are two types of assembly tools. The old version where the complete spirit level is
shown and one new version where the front part of the spirit level is hidden. When using the
old version make sure that the bubble in the spirit level sits on the lines of the back part of
the spirit level (marked on the pictures bellow with a rectangle). Since the adapter bar now
have splines inside it will not be possible to get the bubble of the spirit level exactly right.
Just choose the most correct position.
Old version
New version
Adjustment of the angle can be done in two different manners. Both is descriped bellow.
Alt.1
Using the adjustment tool that is
included in the delivery of Liberty (not
this mounting set), set the angle of
the adaptorbar so that the spirit level
is in level. Inside the pipes there are
splines so when rotating you will feel
and hear a clicking. When desired
angle have been accomplished, check
that the center pipe is centered in the
wheelchair. Now tighten the screws in
the clamps (C).
__________________________________________________________________________________
Sida 6/9
Advertisement
