Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for decon LBM7112
Summary of Contents for decon LBM7112
- Page 1 Assembly Instructions LBM7112, LBM7212 Liberty Mounting set Panthera S3 Large 2021-11 Revision 1...
-
Page 2: General Instructions
Particularly important or explanatory information General instructions These instructions shall always be followed when placing the mounting set LBM7112 and LBM7212 on a wheelchair. Maximum user weight for the mounting set is 150kg To be able to connect Liberty to the wheelchair Liberty also needs to be adjusted according to the assembly instructions that is included in the delivery of Liberty. - Page 3 Mounting set LBM7112, LBM7212 __________________________________________________________________________________ 2. Overview A Center pipe adapter bar B Outer pipe adapter bar C Clamp adapter bar D Holder adapter bar E QR-Pin F Bar G Chassis clamp H Holder screw __________________________________________________________________________________ Sida 3/9...
- Page 4 Mounting set LBM7112, LBM7212 __________________________________________________________________________________ 3. Assembly and adjustment of adaptor First mount the holder (D) onto the bar (F) and secure it by using the screws (H). Now mount the preassembled parts onto the wheelchair by using the chassis clamps (G), see picture as example.
- Page 5 Mounting set LBM7112, LBM7212 __________________________________________________________________________________ WARNING! One clamp (G) is to be mounted on each side of the holder (D) to avoid that the bar breaks due to fatigue stress. Now mount the complete adapter bar that consists of center pipe (A), outer pipe (B) and clamp (C).
- Page 6 Mounting set LBM7112, LBM7212 __________________________________________________________________________________ There are two types of assembly tools. The old version where the complete spirit level is shown and one new version where the front part of the spirit level is hidden. When using the old version make sure that the bubble in the spirit level sits on the lines of the back part of the spirit level (marked on the pictures bellow with a rectangle).
- Page 7 Mounting set LBM7112, LBM7212 __________________________________________________________________________________ Alt.2 Using the adjustment tool that is included in the delivery of Liberty (not this mounting set), set the angle of the adaptorbar. Only mount the inner pipe on one side and then rotate the center pipe to the correct angle.
- Page 8 Mounting set LBM7112, LBM7212 __________________________________________________________________________________ 4. Spacers between support leg To connect Liberty onto the wheelchair a longer support leg and spacers must be assembled between the support leg and middle part of Liberty. The longer support leg is above all needed on wheelchair using 25”...
- Page 9 Decon Wheel AB Södra Ekeryd 119, SE-314 93 Hyltebruk, Sweden Tel: +46 (0)345 40880 Fax: +46 (0)345 40895 E-mail: info@decon.se...
Need help?
Do you have a question about the LBM7112 and is the answer not in the manual?
Questions and answers