Inter-Character Delay; Predefined Delay Values; Compose Inter-Character Delay - Intermec MicroBar NX Reference Manual

Inter-character delay

The maximum rate at which data can be transmitted by the MicroBar NX is affected by the
response of the system. By the insertion of an inter-character delay, the MicroBar NX can
avoid dropping characters if it is transmitting decoded data too rapidly.
This feature can only be used with keyboard wedge and RS-232 interfaces.

Predefined delay values

No Delay (*)
20 ms
40 ms

Compose inter-character delay

Example To make your MicroBar NX insert an 80 ms delay between characters:
1. Scan Compose Inter-Character Delay on the next page.
2. Scan
3. Scan End Selection.
MB/NX/RM/00/E/970131
8 then 0.
Inter-character delay
10 ms
30 ms
50 ms
51