Good Read Beeps / Good Read Led - Intermec MicroBar NX Reference Manual

Good read beeps / good read LED

By default, a single short beep (80 ms) indicates that the barcode has been read
successfully.
If Beep After Transmission is selected, the same beep indicates that the bar code has been
read and transmitted to the host system.
Number of good read beeps
1 Good Read Beep (*)
No Good Read Beep
Timing of good read beeps
Beep Before Transmission (*)
MB/NX/RM/00/E/970131
Beeps and LEDs
2 Good Read Beeps
Beep After Transmission
15