System Board - HP Spectre x360 Maintenance And Service Manual

3. Remove the eight Phillips M2.0 × 2.5 screws (2) that secure the assembly to the computer, and then
remove the assembly (3).
4. Thoroughly clean the thermal material from the surfaces of the heat sink and the system board
components each time the heat sink is removed. Replacement thermal material is included with the
heat sink and system board spare part kits. The following illustration shows the replacement thermal
material locations.
Thermal material is used on the heat sink (1) and associated system board component (2).
To install the fan and heat sink assembly, reverse this procedure.

System board

To remove the system board and USB door, use these procedures and illustrations.
Table 5-8 System board and USB door descriptions and part numbers
Description
Intel Core i7-1255U processor and 32 GB of system memory
42 Chapter 5 Removal and replacement procedures for authorized service provider parts
Spare part number
N10723-601