Solid-State Drive - HP Spectre x360 Maintenance And Service Manual

3. Remove the battery (3).
To install the battery, reverse the removal procedures.

Solid-state drive

To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-3 Solid-state drive descriptions and part numbers
Description
2 TB
1 TB
512 GB
Solid-state drive thermal pad
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1. Remove the two Phillips M2.0 × 2.5 screws (1) that secure the drive cover, and then remove the cover (2).
36 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 33).
33).
Battery on page 34).
Spare part number
M52027-005
M16560-005
M17436-005
N15331-001