Connector Types And Pin Definitions - Intermec MaxiScan 2500 User Manual

20
A. CONNECTOR TYPES AND PIN DEFINITIONS
There are two dual interface versions of the MaxiScan 2500 DP available:
RS232C/OCIA and IBM RS485/Keyboard Wedge. The various pin definitions for
the applicable Data port are given on page 21. The connector to be used for the
port is indicated below.
GROUND PIN
EAS CONNECTOR
(more details
upon request)
Stewart 940SP301010RK2
7-10
IMPORTANT
To activate Data port 2 (OCIA or KBW interface) scan the following codes
from the Configuration Guide:
1. open the scanner Programming Mode by scanning code 1.1
2. return to factory default settings by scanning code 1.3
AUX PORT
pin 1
pin 10
male connector
front view:
pin 1
pin 10
Aux port
Pin Description
1 +5VDC (250 mA max.)
2 CTS
3 RXD
4 Reserved
RTS
5
6 GND
Reserved
POWER SUPPLY PORT
IINTERFACE PORT 1
AMP 5-554169-1
male connector
front view:
pin 1
pin 8
pin 8
INTERFACE PORT 2
pin 1
pin 8
pin 1
Appendices
pin 1
AMP 5-554170-1
male connector
front view:
pin 8