Barcode Length - Intermec MaxiScan 2200 Reference Manual

Intermec maxiscan 2200: reference guide
Hide thumbs Also See for MaxiScan 2200:
Table of Contents

Advertisement

Symbologies—Matrix 2 of 5

Barcode length

Minimum Length = 6 (*)
Barcode length (number of characters) for Matrix 2 of 5 = [barcode data]. The minimum
length possible is 3 characters.
If you scan Compose 1 Or 2 Or 3 Fixed Lengths or Compose Minimum Length, use the
special number codes (
ASCII character codes (
Compose 1 Or 2 Or 3 Fixed Lengths provides the most security if the codes in your
application have fixed lengths:
if you use the number codes, scan End Selection after each length and scan End
Selection a second time when you have finished (after 1, 2 or 3 fixed lengths),
if you use the ASCII codes, do not scan End Selection until you have finished entering
all the lengths (after 1, 2 or 3 fixed lengths).
Compose Minimum Length provides a certain degree of security if you know the minimum
length of the codes in your application—enter the minimum length (number codes or ASCII
code) and scan End Selection to finish.
Return To Current Minimum Length cancels any fixed length settings.
Compose Minimum Length
194
Number codes or appendix at the end of this manual) or the
ASCII character codes ) to enter the barcode lengths.
Return To Current Minimum Length
Compose 1 Or 2 Or 3 Fixed Lengths
MS/2200/RM/00/E/970131

Advertisement

Table of Contents
loading

Table of Contents