Stairville TinyBright IP Q15 User Manual page 12

Safety instructions
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.
NOTICE!
Voltage supply
Connect the device directly to the power grid. It must not be connected to a dimmer. Before connecting the device, you have to
ensure that the rated voltage indicated on the device matches the voltage of the power grid available in the operating place. You
must also take care that the power grid is protected by a residual current circuit breaker. Failure to do so can result in damage to the
device and injury to the user. In case a thunderstorm is coming up or you're not going to use the device for a longer period of time,
disconnect it from the power grid to reduce the risk of electric shock and fire.
NOTICE!
Risk of fire due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries. Ensure that proper polarity is observed when inserting bat‐
teries.
NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device. Take batteries out of the device if it is not going to be used for a
longer period.
TinyBright IP Q15
12
LED Floodlight