Table of Contents
Advertisement
3.3
10/100 Ethernet Connection Port
The Ethernet Port is used both for Ethernet protocol communications and for configuring the gateway via the Web App. To
connect the gateway, either connect the PC to the router's Ethernet port or connect the router and PC to an Ethernet switch.
Use Cat-5 cables for the connection.
NOTE: The Default IP Address of the gateway is 192.168.2.101, Subnet Mask is 255.255.255.0.
EZ Gateway Modbus to BACnet Start-up Guide
11
Advertisement
Table of Contents
Need help?
Do you have a question about the fieldserver EZ Series and is the answer not in the manual?