Advertisement
http://www.monomachines.com/
Clean the folding rollers of the machine once every 15 thousand folds. Do this by
removing the spring loaded bonnet assembly. You will need a can of Rubber
Roller Cleaner and a 3M Scotch-brite pad. Clean each roller throughly by
rotating by hand to scrub each section. Use an old cloth to mop up any liquid
residue that may be left over. Also, from time to time the feed tire of the unit may
become soiled and need to be cleaned. In this case, soap and warm water
would be ideal.
Should the machine become labored, apply one drop of lubrication to each of the
units folding roller bushings. A light weight all purpose lubrication is
recommended for this.
UNIT WILL NOT RUN:
Turn power to unit off for 60 seconds and try again. If still no power, verify a
good plug in by plugging in another device. Also, in the power jack on the
machine there is a metal spring clip. It is possible over a period of time that the
clip could get bent and no longer make good contact. With a n unfolded paper
clip, bend the bracket outward to make sure it provides good contact. If there is
still no power, call Martin Yale Industries, Inc. technical support at 219-563-0641.
Clean rollers, make sure that you allow the stock time to cool (one hour). Do not
place the machine on a metal table, and try to operate unit in a temperature
controlled environment. If unit still wrinkles paper, call Martin Yale Industries,
Inc. technical support at 219-563-0641.
Make sure the paper guides are not pinching the stock. Monitor the feed tire for
wear and tear. Replace if excessively warn. Allow the stock time to cool (one
hour) after being duplicated.
NOTE: If stock has a slick finish, friction fed folders in general have
difficulty feeding and folding this type of paper.
Make sure that each of the paper stops are lined up straight, and stack is
properly inserted. If due for a cleaning or if you suspect that some characteristic
of your stock could cause rapid contamination, thoroughly clean the rollers of the
unit. Always suspect dirty rollers when any fold machine starts giving fold
http://www.monomachines.com/
1501X OPERATIONAL INSTRUCTIONS
MAINTENANCE
TROUBLESHOOTING
WRINKLED FOLDS
PAPER WILL NOT FEED
CROOKED FOLD
For More Info
V
Click Here --->
Advertisement
