Intermec PB21 User Manual page 61

Print Speed and Resolution
Print speed: 4 ips (100 mm/s)
Resolution: 203 dpi (8 dots/mm)
Print Technology
Printhead:
Maximum print width:
Media Specifications
Minimum black mark length:
Minimum black mark, and notch length:
Minimum notch length:
Minimum notch width:
Black mark width:
Core inside diameter:
Roll outside diameter:
Tracking
Maximum caliper for tags:
Minimum media length:
Maximum media length:
PB21/PB31 Mobile Receipt Printer User's Guide
Direct thermal
PB21 48mm (1.8 in)
PB31 72mm (2.8 in)
Receipt roll stock media is supplied as a continuous roll. Tag, and
fanfold media use repeat indicators for non-continuous media. Gap,
notch, and black marks are used as repeat indicators:
• Notch: Tag media
• Black mark: Tag, and fanfold media
Here are a few things to keep in mind when ordering media for the
PB21/PB31 printer:
• Black marks can be sensed on the front side of the media.
Appendix A — Specifications
3.17 mm (0.125 in)
12.7 mm (0.50 in)
6.35 mm (0.25 in)
12.7 mm (0.50 in)
Full width of media
19.05 mm (0.75 in)
PB21 57.15 mm (2.25 in)
PB31 67.31 mm (2.65 in)
Center
0.15 mm (0.006 in)
12.7 mm (0.5 in)
Continuous
55