Intermec PB21 User Manual page 35

PB21/PB31 Mobile Receipt Printer User's Guide
Each PB21/PB31 equipped with a Bluetooth radio has a unique
Bluetooth Device Address (BDA) loaded into its module when
manufactured. You can find the BDA on the certification label located
on the bottom of the printer.
To set up Bluetooth communications with a mobile computer
• Follow the procedure to discover and connect to Bluetooth devices
in your mobile computer user's manual.
Note: For maximum security, you need to configure a Bluetooth
passcode for the PB21/PB31. The default passcode for the PB21/PB31
is "1234."
To set up Bluetooth communications with a scanner
1 Download and install EasySet.
2 Create the following bar code labels using EasySet:
Administrator reset factory defaults
•
• Bluetooth parameters - security - not active
• Bluetooth parameters - connect/disconnect - compose BT
address
• Bluetooth parameters - security - compose PIN
3 Scan the bar code labels with the Bluetooth scanner.
Understanding Bluetooth Radio Icons
Icon Description
The Bluetooth radio is on and the printer is not connected to a
serial cable.
The Bluetooth radio is turned off. The Bluetooth radio turns off
when you connect a serial cable.
Chapter 2 — Configuring the PB21/PB31
29