Battery Pack Removal - Intermec PB40A Quick Start Manual

Self Test Print-out Explanation (continued)
Test Item Description
Available Bar Codes All supported barcodes are displayed. "DE-
SCRIPTION" describes the graphic. "NAMES"
give the "Easy Print" name, the Line Printer name,
and the hexadecimal equivalent of that name.
Card Reader Option Shows the current Card Reader configuration.

Battery Pack Removal

Note: Ensure that you have your ESD wrist strap
connected to the ESD static free mat before placing
your printer on the mat and begin removing the bat-
tery pack.
1 Remove the four screws securing the printer mechanism.
2 Lift the printer mechanism out of the case. One way to do
this is to turn the printer case on its side and gently tap
the bottom of the case to remove the board assembly. Be
careful not to pull on the cluster of black wires running
from the inside of the printer case to the printer mecha-
nism assembly.
8
Screws (4)
(two on each side)
PB40A Printer Quick Start Guide