Intermec PB40A Quick Start Manual page 11

12 Carefully seat the printer in the case, you do not want to
pinch the wires between the printer mechanism and the
case.
13 Replace the four screws securing the printer mechanism to
the printer case.
14 Charge the battery 2-3 hours using your AC adapter or
cigarette lighter adapter.
15 Properly dispose of the used battery pack.
Using Your Printer with Serial
Connection
1 Attach the Mobile Computer to Printer cable.
Computer to Printer Jack
Mobile Computer to Printer Cable
2 As you use the printer the power comes from the battery in
the printer. When the printer battery runs down the printer
will not operate until the battery is recharged.
PB40A Printer using Wireless
Printing
IrDA/Wireless Mode
Your printer comes to you as an IrDA mode printer. To switch
the mode to Wireless Printing it is necessary to toggle the mode
via the self-test function of the printer.
Performing the self-test indicates the current mode of the print-
er. The mode displays on the ticket and an audible indication
sounds. Each time the self-test function is performed the mode
will toggle between wireless printing and IrDA modes.
PB40A Printer Quick Start Guide
11