Intermec EasyCoder 3440 User Manual page 4

If you wish to install a TrueType font in your printer, you must have enough
memory available to contain the entire font file. The size of the TrueType font
file, in bytes, is the minimum amount of memory you must have available in
your printer. Bitmap fonts generated from TrueType files will vary in size,
depending on the point size and number of characters you create. The larger
the point size you choose, the larger the resulting file size.
Chinese, Japanese, and Korean languages contain thousands of characters. If
you wish to use these languages, you will need to purchase expanded flash
RAM to store them in your printer. The amount of memory depends on the
size and number of fonts you wish to install.
Use this table to determine the approximate size of some Asian TrueType
fonts. The approximate size is shown in dots per inch (dpi).
Korean KSC-5601
Traditional Chinese Big 5
Simplified Chinese GB
Japanese Shift-JIS
Some TrueType fonts require large amounts of dynamic RAM to operate. If
you receive an error code 37 when printing a label using TrueType fonts, you
may need to purchase expanded dynamic RAM.
12 pt 1.6MB
2.7MB
16 pt
24 pt 5.8MB
12 pt 3.1MB
16 pt 5.25MB
12 pt 3.5MB
16 pt 6.2MB
12 pt 3.9MB
16 pt 6.75MB
0.5MB
0.8MB
1.5MB
0.9MB
1.6MB
1MB
1.8MB
1.1MB
2MB