Intermec EasyCoder 3440 User Manual page 12

Note: If you have developed previous applications using Mode 0, your printer will still
support your application. However, we recommend using Mode 2 or 3 for new
applications.
2
3
4
5
6
When you select Maxicode, you must format your data to conform to these five
fields.
Note: The header only applies to Structured Carrier Message (Modes 2 and 3). It is an
optional field. If it is present, the printer moves it to the beginning of the secondary
message. It is not encoded as part of the primary message. The primary message
consists of the zip code, country code, and the service class.
1 Header (optional)
2 ZIP code + 4-digit extension
3 Country code
4 Service class
5 Secondary message
1
Notes: The NULL character is not supported. If the NULL character appears in the
user data, you will lose it along with any following data.
Maxicode only supports the control characters for field separators (<RS> and
<GS>) in the secondary message.
Structured Carrier Message for U.S. destinations
Structured Carrier Message for International destinations
Standard Symbol
Full Enhanced Error Correction (EEC)
Reader Programming
2 3 4
Nine
Four
Three
Three
84
5
p
None
None
840 (U.S.)
999
None
IPL.018