fantastic furniture Torkay Manual page 9

Step 7
You will need:
Phillips Head
6 x Cam Nuts
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 6x Cam Nuts (H2) into the Centre Shelf (P6) and Bottom Shelf (P7) as shown.
Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Attach the Centre Shelf (P6) and the Bottom Shelf (P7) to the Left Side Panel (P2)
by tightening the Cam Nuts in the Centre Shelf (P6) and the Bottom Shelf (P7) with
the Phillips Head Screwdriver.
Step 8
You will need:
Phillips Head
2 x Cam Nuts
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 2x Cam Nuts (H2) into the remaining Centre Panel (P5) as shown. Rotate the
Cam Nuts so the arrows point towards the incoming Cam Bolts.
Attach the Centre Panel (P5) to the Centre Shelf (P6) by tightening the Cam Nuts
in the Centre Panel (P5) with the Phillips Head Screwdriver.
fantasticfurniture.com.au
Screwdriver
Screwdriver
(P2)
Ensure the white, bevelled edge of
the centre panel is facing the front
of the bookcase before securing.
(H2)x2
(P5)
(P2)
(P6)
(P7)
(H2)x6
(P6)
Page 9