fantastic furniture Torkay Manual page 8

Step 5
You will need:
Phillips Head
4 x Cam Nuts
Screwdriver
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 4x Cam Nuts (H2) into two of the Centre Panels (P5) as shown. Rotate the Cam
Nuts so the arrows point towards the incoming Cam Bolts.
Attach the Centre Panels (P5) to the Bottom Shelf (P7) by tightening the Cam Nuts in
the Centre Panels (P5) with the Phillips Head Screwdriver.
Step 6
You will need:
Phillips Head
4 x Cam Nuts
Screwdriver
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 4x Cam Nuts (H2) into the opposite end of the same Centre Panels (P5) as
shown. Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Attach the Centre Panels (P5) to the Centre Shelf (P6) by tightening the Cam Nuts
in the Centre Panels (P5) with the Phillips Head Screwdriver.
fantasticfurniture.com.au
Ensure the white, bevelled edges of
the centre panels and bottom shelf
are facing the front of the bookcase
before securing.
(P5)
(P5)
(H2)x4
(P7)
Ensure the white, bevelled edge of
the centre shelf is facing the front
of the bookcase to match the
centre panels and bottom shelf
before securing.
(P6)
(P5)
(P5)
(H2)x4
(P7)
Page 8