fantastic furniture Torkay Manual page 10

Step 9
You will need:
Phillips Head
1 x Cam Nut
Screwdriver
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 1x Cam Nut (H2) into the Top Panel Rail (P4) as shown. Rotate the Cam Nuts
so the arrows point towards the incoming Cam Bolts.
Attach the Top Panel Rail (P4) to the Left Side Panel (P2) by tightening the Cam
Nut in the Top Panel Rail (P4) with the Phillips Head Screwdriver.
Step 10
You will need:
Phillips Head
7 x Cam Nuts
Screwdriver
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 7x Cam Nuts (H2) into the Top Panel Rail (P4), Centre Shelf (P6) and Bottom
Shelf (P7) as shown. Rotate the Cam Nuts so the arrows point towards the
incoming Cam Bolts.
Attach the Top Panel Rail (P4), Centre Shelf (P6) and the Bottom Shelf (P7) to the
Right Side Panel (P3) by tightening the Cam Nuts in the Top Panel Rail (P4), Centre
Shelf (P6) and Bottom Shelf (P7) with the Phillips Head Screwdriver.
fantasticfurniture.com.au
Ensure the countersunk holes are on the
underside of the top rail panel before
securing.
(P4)
(H2)
(P2)
(P4)
(P3)
(P6)
(P7)
(H2)x7
Page 10