Procom FIB100 Manual page 9

14. Insert the male port of blower (B) and in
to the corresponding female port.
See Fig. 14.
15. Connect the port and shell board with
linker (male port) into the three wires
with protecting jacket (please refer to
linker (female port) (red, yellow and
black) with grounding label); Put
protecting jacket into rocker switch (E)
corresponding. See Fig. 15.
16. Push the rocker switch into the hole on
the panel. See Fig. 16.
Female Port
Female Port
E
9
Fig. 14
B
Male Port
Male Port
Fig. 15
E
Fig. 16
AUTO
OFF
MAN