Procom FIB100 Manual page 4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list. If any part is missing or damaged, do not attempt to assemble the
product. Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly: Philips Screwdriver and Wire Cutter
ASSEMBLY INSTRUCTIONS
This blower contains assembly instructions for the following models and item numbers.
For the CRHFD28TCM-6-AU (Item # 0309527), CRHFD32RT-M-MO, FBD28 and FBD32 series,
PC32VFC and PC36VFC
Before installing the blower, be certain
to turn off the unit, and allow time for
unit to cool down.
1. Remove upper fire box by unscrewing
left/right screws on the fire box. See Fig. 1.
4
Fig. 1