Procom FIB100 Manual page 5

2. Unscrew two screws on heat insulation
board cover and draw it out. See Fig. 2.
3. Affix temperature sensor to heat insulation
board cover with M4.2X8 screws (AA).
See Fig. 3.
4. Insert wires into the space between wire
protecting board and shell; Fix the wires to
the top cover with wire fixture. See Fig. 4.
c
AA
Hardware Used
M4.2X8 screw
AA
Protecting Protecting
Board
Board
5
Fig. 2
Fig. 3
Fig. 4
Wire
Wire
Fixture
Fixture
x2