Intermec Janus 2010 Reference Manual page 204

JANUS PSK for Ada Reference Manual
Status Codes and Error Messages Listed in Numerical Order (continued)
Hex Code Severity
8605 Error
8606 Error
8607 Error
8608 Error
8609 Error
860A Error
860B Error
860C Error
860D Error
860E Error
860F Error
8610 Error
8611 Error
8612 Error
8613 Error
8614 Error
86F0 Error
8821 Error
8822 Error
8842 Error
8843 Error
A-16
Subsystem Reader Message and Description
CU Comm port busy
CU Service not supported
Communication request is not supported
CU Prot handler already loaded
Protocol handler already loaded
CU Prot buffer error
Protocol buffer error
CU Unknown service request
CU No data available
CU ComUtil not loaded
Communications utility is not loaded
CU Resume/Suspend failure
CU INT 14 already in use
Communication utility INT 14 is already in use
CU Incompatible rev PH or ComUtil
Incompatible revision between the protocol handler and the
communication utility
CU Invalid EOF char
CU Buffer must be > 256 bytes
CU Prot handler not active
Protocol handler is not active
CU Buff size too big
CU Re-entrant request for service
CU H/W I/O error
Hardware I/O error
CU Non-supported Comm service
Non-supported communication service
PM Cannot change state
PM State mgr invalid cmd
Invalid state manager command
PM IPM interface invalid cmd
Invalid IPM interface command
PM Parameter out of range