Intermec Janus 2010 Reference Manual page 200

JANUS PSK for Ada Reference Manual
Status Codes and Error Messages Listed in Numerical Order (continued)
Hex Code Severity
8237 Error
8238 Error
8239 Error
823A Error
823B Error
823C Error
823D Error
823E Error
823F Error
8240 Error
8241 Error
8242 Error
8243 Error
8244 Error
8245 Error
8246 Error
8300 Error
A-12
Subsystem Reader Message and Description
CM Invalid 5th param value
Invalid fifth parameter value
CM Invalid 6th param value
Invalid sixth parameter value
CM Can't open JANUS.ERR
Unable to open JANUS.ERR file
CM Radio.cfg has invalid checksum
File checksum is invalid
CM Invalid RF freq in RF config
Invalid RF frequency specified
CM Invalid RF channel in RF config
Invalid channel specified
CM CM_ENCODED_RF_DATA_S != CM_NUM_RF_CHANNELS
Structure mismatch
CM Allowed RF channels after unallowed channel
Specified RF channel is not allowed
CM Ping cmd not allowed here
Ping command not allowed here
CM Ping cmd not xmitted, prot busy
Ping command not transmitted (protocol busy)
CM Missing end of config cmd
Missing end of configuration command
CM RF freq doesn't match RF back type
RF frequency does not match the RF back
CM Can't read RF back config data
Unable to read configuration data from the RF back
CM Unallowed video display mode
Video display mode is not allowed
CM Cmd source not allowed
Command source is not allowed
CM Invalid 7th param value
Invalid seventh parameter value
SC Scanner load err
Scanner load error