5055 Data Collection Pc; Characters On The Keyboard - Intermec CK30 Programmer's Manual

—
Chapter 3 Using the Terminal's Keyboard

5055 Data Collection PC

This illustration shows the keyboard for the 5055 Data Collection PC.

Characters on the Keyboard

38
For help with using the keyboard, refer to the 5055 Data Collection PC
User's Guide (P/N 961-054-017).
The special characters and functions printed on the overlay are color-coded
to correspond with the matching shift keys. The shift keys are as follows.
[Shift] Press [Shift] plus a letter to type the letter in uppercase.
[Blue] The blue (Ctrl) key puts the keyboard into blue shift mode. Press [Blue]
plus a keyboard key to do an operation printed in blue, or to send a con-
trol character.
[Gold] The gold (Alt) key puts the keyboard into gold shift mode. Press [Gold]
plus a keyboard key to do an operation printed in gold.
[NumLock] The green (number lock) key puts the keyboard into NumLock mode.
Press [NumLock] plus a keyboard key to type a number or character
printed in green.
Note: The following keys are not supported: Fn, Setup, SysReq, Pause,
Break, End, ScrLk, PgDn, and PgUp. The keyboard does not have keys
for the "Not" symbol (') and the "cent" symbol (¢). To enter these sym-
bols, scan the following bar codes (also in Appendix A, "Bar Code Scan-
ning").
Cent (¢)
*/ECENT*
*%CENT*
Not (¬)
*/ENOT*
*%NOT*
TE 2000
™
3270 Terminal Emulation Programmer's Guide
Unlabeled Key Colors:
Blue
Gold