Intermec CK30 Programmer's Manual page 122

—
Chapter 4 Using the Terminal Emulation Menus
5) Code 11 is for
59XX, 17XX, 11XX, 700 Series,
CK30, CK31, CV60
3) MOD11 Chk is blank
for 700 Series, CK30,
CK31, CV60
4) Allow Alpha is for
59XX, 17XX, 11XX
102
Scan Options 2 (Additional Bar Codes)
This menu offers additional bar code selections. After enabling a bar code
symbology, various options, including length can be set.
When all options are set, the display returns to the Scan Options 2 menu.
This menu and the bar code symbologies to be enabled are shown below.
When all needed bar code symbologies are enabled, press [Enter] to return
to the Scan Options menu. Press [Enter] again to back out and return to
the 1) Set-up Parms menu.
Plessey
1) Enabled
2) MOD10 Chk
3) MOD11 Chk
4) Allow Alpha
Int 2of5
1) Enabled
2) Chk Digit
Code 11
1) Enabled
2) Chk Dig 1
3) Chk Dig 2
TE 2000
Scan Options 2
1) Plessey
2) Str 2of5
3) Int 2of5
4) CI 2of5
5) Code 11
6) Code 93
[1]
[2]
[3] [4]
[6]
[5]
™
3270 Terminal Emulation Programmer's Guide
Str 2of5
1) Enabled
2) Disabled
CI 2of5
1) Enabled
2) Disabled
Code 93
1) Enabled
2) Disabled