Chamberlain MyQ Garage User Manual
Universal smartphone garage door controller
Hide thumbs
Also See for MyQ Garage:
- Quick setup manual (2 pages) ,
- Quick start manual ,
- Quick start manual (16 pages)
Related Manuals for Chamberlain MyQ Garage
Summary of Contents for Chamberlain MyQ Garage
- Page 1 MyQ Garage Universal Smartphone Garage Door Controller USER’S GUIDE Serial Number (affi x serial number label)
- Page 2 To reduce the risk of SEVERE INJURY to persons: • DO NOT enable the Chamberlain Universal Smartphone Garage Door Controller if operating either one-piece or swinging doors. To be enabled ONLY on a sectional door. Read instructions thoroughly BEFORE beginning.
- Page 3 • Broadband Internet Connection • Wi-Fi Hub Serial Number (located in this User's Guide and on the Wi-Fi Hub) • Compatible Garage Door Opener (www.chamberlain.com/MyQGarage) • Make sure your mobile device is connected to the Wi-Fi network. ® • Make sure there is a strong Wi-Fi signal in the garage where the Wi-Fi Hub will be mounted.
- Page 4 CONNECT TO NETWORK Make sure the Wi-Fi signal in the garage is strong and your mobile device is connected to your home Wi-Fi network. Connect with mobile device 1. Plug in the Wi-Fi Hub. The blue LED will blink, the Wi-Fi Hub is ready to be connected to your home Wi-Fi network.
- Page 5 Wi-Fi Hub to connect to the router. The Wi-Fi Hub’s green LED will turn solid when the Wi-Fi Hub is connected to your network. 4. Download the Chamberlain MyQ ® Home Control App from the App Store or Google Play.
- Page 6 INSTALLATION 1. Choose a location to install the Wi-Fi Hub: • Wi-Fi Hub light MUST be visible if you're standing in the doorway of the garage • Wi-Fi Hub MUST be a minimum of two feet away from the garage door opener 2.
- Page 7 REGISTER AND TRY IT Open the App and sign up for an account. Follow the on-screen prompts in the App to complete your setup. Once setup is complete, use the App to control your garage door. NEED HELP? The Wi-Fi Hub will not connect. •...
- Page 8 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by The Chamberlain Group, Inc. is under license. Other trademarks and trade names are those of their respective owners. Wi-Fi ®...
Need help?
Do you have a question about the MyQ Garage and is the answer not in the manual?
Questions and answers
if i need to unplug the my q device, will i need to reprogram it when i plug it back in?
@patrick s gregory
The provided information does not specify whether the Chamberlain MyQ Garage device needs to be reprogrammed after unplugging and plugging it back in. However, it does mention a factory reset process, which is different from simply unplugging the device. If the device retains settings after a power cycle, reprogramming may not be necessary.
This answer is automatically generated