Table of Contents
Advertisement
2
INSTALLATION
1. Choose a location to install the Wi-Fi Hub:
• Wi-Fi Hub light MUST be visible if you're standing in the doorway of the garage
• Wi-Fi Hub MUST be a minimum of two feet away from the garage door opener
2. Place the Wi-Fi Hub in its mounting location, plug it in, and verify the Green LED
turns on solid. NOTE: If the Green LED does not turn on solid, move the router
closer to the garage or install a Wi-Fi range extender.
3. Use the Wi-Fi Hub bracket as a template to drill 5/32" pilot holes. Attach the bracket.
Slide the Wi-Fi Hub onto the bracket.
4. Attach the door sensor vertically on the top panel of the garage door using
fastening strips or screws (provided).
5. Attach the warning placard to the wall next to the door control.
(mounting area)
Door Control
Warning
Placard
Press
Wi-Fi Hub
Door Sensor (with screws)
"TOP" MUST always
face UP
6
(ceiling)
"TOP" MUST always face UP
Fastening
Strips
Door Sensor
Advertisement
Table of Contents
