LiftMaster MyQ Garage 821LM Quick Setup Guide

LiftMaster MyQ Garage 821LM Quick Setup Guide

Also See for Liftmaster MyQ Garage 821lm:

Advertisement

LiftMaster MyQ Garage 821LM Quick Setup Guide

Introduction


READ ME
PLEASE KEEP THIS CARD TO COMPLETE THE WI-FI SETUP FOR THE UNIVERSAL GARAGE DOOR SMARTPHONE CONTROLLER.

TO SETUP THE WI-FI YOU MUST HAVE THE FOLLOWING:

  • Router with Wi-Fi
  • Broadband Internet Connection
  • Wi-Fi Hub Serial Number listed below (also located on the bottom of the Wi-Fi hub):

Setup the Wi-Fi

The blue LED on the Wi-Fi hub must be blinking. If the blue LED is not blinking, press the test button on the door sensor or unplug the power supply for the Wi-Fi hub and reconnect the power supply (the blue LED will blink).
Setup the Wi-Fi

  • iPhone® and iPod touch®*
  1. Ensure your iPhone or iPod touch is connected to your home Wi-Fi network, if not connect to network.
  2. On your iPhone or iPod touch, go to Settings > Bluetooth®, and turn on Bluetooth.
  3. Find the Bluetooth device with the "MyQ" prefi x and select it to pair.
  4. Follow the iPhone or iPod touch prompts to add the Wi-Fi hub to your Wi-Fi network and download the LiftMaster MyQ® Home Control app.
    NOTE: It may take a few minutes for the Wi-Fi hub to connect to the Internet. When fully connected to the Internet, the green LED on the Wi-Fi hub will be on solid.
  5. If unsuccessful, follow "All Other Devices". Launch the app, follow the onscreen instructions to sign up and complete the setup.

*"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifi cally to iPod or iPhone respectively, and has been certifi ed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

OR

  • All Other Devices:
  1. Go to the mobile device's Wi-Fi Settings and turn on Wi-Fi.
  2. Locate the list of available Wi-Fi networks and select the network with the "MyQ" prefix.
  3. Launch the mobile device's web browser and go to http://setup.myqdevice.com
  4. The MyQ Wi-Fi Setup page will open.
  5. Follow the onscreen instructions to sign up and complete the setup.
    NOTE: The network's name and its associated security key/password (if applicable) will be required.

*Made for: iPhone® 5, iPhone 4S, iPhone 4, and iPhone 3GS, iPod touch® (3rd, 4th and 5th generation)

Apple, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by The Chamberlain Group, Inc. is under license.
Other trademarks and trade names are those of their respective owners. Wi-Fi® is a registered trademark of Wi-Fi Alliance.

www.myliftmaster.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download LiftMaster MyQ Garage 821LM Quick Setup Guide

Advertisement

Need help?

Need help?

Do you have a question about the Liftmaster MyQ Garage 821lm and is the answer not in the manual?

Questions and answers

Table of Contents