Table of Contents
Advertisement
9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
ERROR 3
ERROR 6
ERROR 7
ERROR 8
ERROR 9
ERROR 7
ERROR 8
ERROR 2
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
ERROR P
ERROR R
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
Cause
A DISC is caught inside the CD deck
and is not ejected
A DISC cannot be played due to
scratches, etc
A DISC is loaded upside-down inside
the CD deck and does not play
The format of the flash memory is
damaged
There is a failure with the flash memory Turn POWER/ACC off and then turn it
An error during recording, scratch on
the disc, or error due to sound skips
SD memory card format is corrupted
DSP Error
A DISC inside the CD changer is not
loaded
A DISC inside the CD changer cannot
be played due to scratches, etc
A DISC inside the CD changer cannot
be played because it is loaded upside-
down
A DISC inside the DVD changer cannot
be played
A DISC cannot be played due to
scratches, etc
A DISC inside the DVD changer cannot
be played because it is loaded upside-
down
Parental level error
Region code error
Measure
This is a failure of CD deck's
mechanism and consult your store of
purchase
Replace with a non-scratched, non-
warped-disc
Eject the disc then reload it properly
Execute ALL ERASE on the flash
memory, and the problem is solved
on again, and the problem is solved
If not solved, executed ALL ERASE on
the flash memory, and the problem is
solved
Turn POWER/ACC off and then turn it
on again, or eject the CD
The problem is solved
Eject and reinsert several times
If the error message persists, format
SD memory card as FAT12, FAT16,
FAT32 or VFAT
Turn POWER/ACC off and then turn it
on again, and the problem is solved
This is a failure of CD changer's
mechanism and consult your store of
purchase
Replace with a non-scratched, non-
warped disc
Eject the disc then reload it properly
This is a failure of DVD mechanism
and consult your store of purchase
Retry or replace with a non-scratched,
non-warped-disc
Eject the disc then reload it properly
Set the correct Parental level
Eject the disc and replace correct
region code disc
35
Advertisement
Table of Contents
