Table of Contents
Advertisement
Basic Operations
Setting the DZE (Digital Z-Enhancer)
This unit is provided with 3 types of sound tone
effects stored in memory. Select the one you
prefer.
* The factory default setting is "DZE-OFF".
Each time you press the [DIGITAL Z-EHCR]
button, the tone effect changes in the following
order:
"DZE-1" ➜ "DZE-2" ➜ "DZE-3" ➜ "DZE-OFF" ➜
"DZE-1"...
• "DZE-1"
: suitable for the coaxial speakers
• "DZE-2"
: suitable for separate speakers
• "DZE-3"
: moderate effect compared to
"DZE-1", "DZE-2"
• "DZE-OFF" : no sound effect
Notes:
• The volume changes each time the DZE setting is
switched.
• Sufficient effects cannot be obtained with some
speaker systems. In such cases, adjust the
volume.
Adjusting the tone
1. Press the [A-M] button and select the item to
adjust.
2. Each time you press the [A-M] button, the
item changes as following order:
●When "DZE-1", "DZE-2" or "DZE-3" is set
"LPO" ➜ "DZE LEVEL" ➜ "BALANCE" ➜
"FADER" ➜ Last function mode...
●When "DZE-OFF" is set
"LPO" ➜ "BASS" ➜ "TREBLE" ➜ "BALANCE"
➜ "FADER" ➜ Last function mode...
Notes:
• The display automatically returns to the previous
mode.
Adjusting the LPO (Listening
Position Optimizer)
This is the function that virtually optimizes the
speaker distances of each type of a car to the
listening position, which realizes the clearer
soundstage.
The setting value has to be adjusted to the
listening position and the type of your car.
* The factory default setting is "TYPE OFF".
1. Press the [A-M] button and select "LPO".
2. Turn the [ROTARY] knob to select the car
type. The adjustment options you can select
are as follows:
• "TYPE OFF"
: no car type selected
• "TYPE CMPCT" : suitable for compact car
• "TYPE SEDAN" : suitable for sedan
• "TYPE 1BOX" : suitable for van
3. Press the [R] or [F] button.
4. Turn the [ROTARY] knob to select seat
position. The adjustment items you can select
as follows:
• "SEAT F-L"
: front left seat
• "SEAT F-R"
: front right seat
• "SEAT REAR" : rear seats
* The factory default setting is "SEAT F-L".
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the DZE level
You can adjust the DZE level in 3 steps and
register each adjustment respectively.
This adjustment can only be performed when the
DZE is set to "DZE-1", "DZE-2" or "DZE-3".
* The factory default setting is "0"
(Adjustment range: -3 to +3).
1. Press the [A-M] button and select "DZE
LEVEL".
2. Turn the [ROTARY] knob to adjust the level.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the DZE
is set to "DZE-OFF".
1. Press the [A-M] button and select "BASS".
2. Turn the [ROTARY] knob clockwise to
emphasize the bass; turning it
counterclockwise attenuates the bass.
* The factory default setting is "B<GAIN 0>"
(Adjustment range: –6 to +8).
3. Press the [R] or [F] button to select
"B<FREQ 50>".
Turn the [ROTARY] knob and select the
frequency.
* The factory default setting is "B<FREQ 50>"
(Adjustment options: 50/80/120 Hz).
4. Press the [R] or [F] button to select
"B<Q 1.00>".
Turning the [ROTARY] knob and select the Q-
curve.
* The factory default setting is "B<Q 1.00>"
(Adjustment options: 1.00/1.25/1.50/2.00).
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
13
Advertisement
Table of Contents
