Orion RKS250F-S Operation Manual page 34

Place of fuse and reset switch with overcurrent relay
Place of fuse and reset switch with overcurrent relay
● Be sure to remount the cabinet plate(s) after resetting safety devices or taking other
corrective action. Never operate the product while the cabinet is open. Touching the inside of
the product may result in injury or electric shock.
● If the product behaves abnormally, switch it off and then cut the power. Then contact your
dealer or product specialist. Continuing to run the product while operation is abnormal may
result in fire or electric shock.
● Be sure to cut the power to the product before taking corrective actions or resetting any of the
safety devices. Leaving power on may result in electric shock or in injury from the fan.
■ Removing the Front Cabinet Panel
1. Remove the screws holding the cabinet. (2 front screws)
2. Pull out the upper part of the top panel and remove by pulling up diagonally to release the catch
on the bottom of the panel.
■Distributing Board
RKS250〜500F(-S)
Fuse
Troubleshooting
WARNING
The screws holding the cabinet
(2 points)
RKS750F
31
Fuse