Monitoring - Orion RKS250F-S Operation Manual

Displaying Refrigerator State
This product can display operational data in the digital display on the control panel.
1. Hold down the SET switch on the control plate for 7 seconds to switch the temperature setting
blinking on the digital display to alternate display of "Hr." and the "accumulated operating hours".
2. Press the Temperature Adjustment switch (▲) to display ① and ② → ⑥ and ⑦ in turn, and the
Temperature Adjustment switch (▼) to display ⑦ and ⑥ → ② and ① in turn.
①Alternate display of "
②Alternate display of "
③Alternate display of "
④Alternate display of "
⑤Alternate display of "
⑥Alternate display of "
⑦Alternate display of "
3. Press the RESET switch to return to the measurement temperature display.

Monitoring

Displaying Refrigerator State
" and the "accumulated operating hours" (Unit : 100Hr)
" and the "last alarm"
" and the "first alarm before the last"
" and the "second alarm before the last"
" and the "third alarm before the last"
" and the "fourth alarm before the last"
" and the "fifth alarm before the last"
16